![]() I created the following PCB wich TBS and many online shops now sell. copy the firmware onto the SD Card into the „ FIRMWARE“ folder.Because of this we recommend to fix it properly in hardware if you have the soldering skills or ask FrSky for support on fixing the hardware. ![]() Using the lower baudrate the update rate is reduced to 62.5Hz (16ms). The regular update rate for CRSF between OpenTX and Crossfire is 250Hz (4ms). ![]() Due this workaround and the lower baudrate the latency will increase. If you lower it to 115’200baud instead of using 400’000baud the issue is resolved. This workaround will give you a baudrate selection on your X7 menu (main menu, hardare page). You can set the Baudrate to 115200 and your Crossfire Module will work without any issues.īe aware: The lower baudrate will slow down the CRSF protocol Your Radio Link to the aircraft is not affected, just the telemetry or LUA Script. The reason is a wrong (changed) inverter on the FrSky QX7, X10S & X12 wich can not handle the 400k baudrate of the CRSF protocol. ![]() If you get constant telemetry warnings or your LUA Script is not working, you might be affected. The current hardware revision of FrSKY QX7, X10S & X12 is not fully compatible with the TBS Crossfire protocol. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |